Unboxing

The first thing to do when you receive your package is to check all the products inside for any missing or incorrect items. If you find any issues, contact customer service promptly.

If everything is in order, let’s get started with the preparation!

Cleaning Before Masturbation

When using your Pocket Pussy for the first time, rinse the exterior under running water. Gently massage the surface with your fingertips until clean.

Slowly open the opening and use the pressure of the water stream to repeatedly squeeze and rinse the interior. You may also gently insert your fingertips to massage and clean inside.

Note: For cups with a protective film, avoid inserting fingers. Instead, rinse thoroughly by holding the opening directly under the faucet.

Lubrication During Masturbation

Dry off the Pocket Pussy thoroughly, shake out any moisture inside, then prepare its essential companions—lubricant & heating rod.

Apply lubricant as needed—typically 5-8ml (two to three pumps) suffices. Start with a smaller amount and add more gradually during use.

Next, plug in the heating rod. Insert it into the canal and wait 5-10 minutes (never exceed 10 minutes) to achieve lifelike warmth. Note: Some lubricant may evaporate during heating due to physical reactions; replenish as desired.

Next, hold the cup by its base and slowly expel the air inside. Then insert your penis. In the vacuum state, the cup’s suction will be even stronger~

1. Appropriate lubricant is required before insertion.
2. If a heating rod is needed, the heating effect will be best.

Cleaning and Maintenance Steps After Masturbation

After masturbation, be sure to clean your Pocket Pussy promptly. Hold the opening under running water and use the water pressure to rinse it.

You can use soap during cleaning, running water while scrubbing with your fingers. Be mindful of your nail length and hand pressure.

Alternatively, use our specialized cleaning wand for a quick, convenient, and thorough clean. Its soft material won’t scratch the inner walls.

Next, use a towel to dry the exterior of the gel-like material.Insert the absorbent stick to remove moisture. When inserting the stick, gently spread the opening with your fingers to assist and avoid excessive force.

Some users find that a single absorbent stick may not fully dry certain channels. Here are two effective tips for thorough drying:

• Wrap a towel around your finger or use a heated rod to slowly enter the passageway while squeezing the cup body to absorb a large amount of moisture. Then insert the absorbent stick into the passageway. At this point, most of the moisture has been removed. Knead the cup body to allow the absorbent stick to fully absorb any remaining moisture.
• Prepare multiple absorbent sticks. Use the first stick to absorb the bulk of moisture, then follow with a dry stick to remove any remaining moisture.

Note: Due to the unique material of the absorbent stick, insert it gently.

Care Instructions for Pocket Pussy

After ensuring the Pocket Pussy surface is completely dry, apply protective powder (using a powder brush or puff). This helps keep the surface dry and hygienic. Apply evenly.

Precautions for Pocket Pussy

• Never turn the silicone inside out: While soft silicone is stretchy, forceful tearing can damage the material.
• Clean both the interior and exterior with a non-acidic detergent.
• Do not rinse or soak the toy in hot water.
• Avoid contact with corrosive liquids. Keep away from sharp objects to prevent scratches.
• Store in a dry, shaded area. Avoid direct sunlight and excessive stretching. Due to the soft material, slight size variations may occur based on environment, storage position, and temperature. This is a natural characteristic of the material and unavoidable. We appreciate your understanding if this happens.
• For large-scale realistic products (e.g., sex dolls, butt plugs, etc.), pay close attention to storage posture and positioning to prevent compression or deformation of the gel material due to improper storage methods.
• When using accessories like suction rods, insert gently to avoid damaging the internal channels with excessive force.
• As the material is rubber-based, prolonged contact with dark-colored or easily-fading fabrics is not recommended to prevent staining.

Summary

While a Pocket Pussy is merely a sex toy, proper use, cleaning, and maintenance ensure a more consistent experience and extend its lifespan.

The three fundamental steps are: wash before use, lubricate during use, and clean after use. Drying and proper care prevent mold and deterioration, while secure storage avoids damage.

Mastering these details will allow your Pocket Pussy to truly become a safe, comfortable, and long-lasting companion.